LL1X80-CR-DA, 80W Dimmable DALI-2 LED Driver

GENERAL DESCRIPTION

DALI-2 certified LED driver, 1 – 100 % dimming range
Very low flicker output complying with IEEE 1789 recommendations
Suitable for flicker-free camera recording applications
Very high efficiency up to 93 %
Suitable for use in emergency lighting applications
Long lifetime up to 100 000 h
Driver protection Class I
Suitable for closed luminaires where protection is done with luminaire construction (Class I or II)
Helvar Driver Configurator support

FUNCTIONAL DESCRIPTION

Adjustable constant current output: 350 mA (default) to 700 mA
Current setting programmable via DALI or with external resistors
Filtered dimming for high-quality light in every application
Latest technology Switch-Control 2* functionality for easy-to-use intensity control
Adaptive LED overload protection, reduces output current if output power over 81 W is detected
Full load recognition with automatic recovery, open and short circuit protection
Multipurpose terminal Iset/NTC for current setting or overtemperature protection
Constant Light Output (CLO), adjustable up to 100 000 h (default disabled)
Power consumption monitor (real-time), running hour monitor (accumulative), energy management (accumulative)

MAINS CHARACTERISTICS

Voltage range 198 VAC – 264 VAC
DC range 176 VDC – 280 VDC
starting voltage > 190 VDC
Mains current at full load 0.34 A – 0.44 A
Frequency 0 / 50 Hz – 60 Hz
Stand-by power consumption 0.3 W
THD at full power < 10 %
Leakage current to earth < 0.5 mA
Tested surge protection 1 kV L-N, 2 kV L-GND (IEC 61000-4-5)
Tested fast transient protection 4 kV (IEC 61000-4-4)

Lataa tuote-esite

Painikkeesta voit ladata tuotekortin PDF-muodossa.

Lisätiedot

malli	LL80DS-DA/AN-350-1400, 80W SELV Dimmable DALI-2 LED Driver
nimellisvirta	350 – 1400mA
himmennys	DALI and 1 – 10V control input, 1 – 100 % dimming range
käyttöjännite	220 – 240 V, 0/ 50 – 60Hz, AC voltage range 198 – 264VAC