Drivers

12V / 24V DC / 54V / 220V

35W 12VDC 3A | constant voltage

75W 54V 0.7-2A TOUCH & Dali | ISOLATED Driver

45W 500-1400mA Driver, Dali | DSI | Switchdim

LL50SE-DA-100-1400 | 50 W SELV DIMMABLE DALI-2 LED DRIVER

LL80DS-DA/AN-350-1400 | 80 W SELV Dimmable DALI-2 LED driver

LL1x80-CR-DA | 80 W Dimmable DALI-2 LED driver

Different drivers for (..) 

Download datasheets on drivers

LPV-35-12, 35W constant voltage LED Driver

AC-DC Single output LED driver Constant Voltage (CV); Output 12VDC at 3A; cable output

  • Constant voltage design
  • Universal AC input / Full range
  • Withstand 300VAC surge input for 5 seconds
  • Protections: Short circuit / Overload / Over voltage ’
  • Cooling by free air convection
  • Fully encapsulated IP67 level
  • Fully isolated plastic case
  • 2 years warranty

Download datasheet

75W 54V 0.7-2A TOUCH & Dali ISOLATED Driver

Linear LV isolated LED drivers / Xitanium 75W 0.7-2A 54V TD 230V

  • Simpler approval process and easy design-in
  • Reduced ripple current and thermal derating for increased reliability
  • Power ratings: 36W, 55W and 75W
  • DALI dimmable & programmable, 1-10V dimmable and fixed-output versions
  • All T5 form factors but various lengths
  • High reliability underpinned by 5 year warranty 

Download datasheet

45W 500-1400mA Driver,
Dali | DSI | Switchdim

NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)

  • Dimmable built-in constant current LED Driver
  • Dimming range 1 – 100% 
  • Adjustable output current between 500 and 1,400 mA
  • Max. output power 45 W
  • Up to 90 % efficiency
  • Power input on stand-by < 0.15 W
  • Nominal life-time up to 100,000 h
  • 5-year guarantee

Download datasheet

LL50SE-DA-100-1400

50 W SELV Dimmable DALI-2 LED driver

  • DALI-2 certified LED driver, 1-100 % dimming range
  • SELV output protection for safety and flexibility in luminaires
  • Amplitude dimming for the highest quality light output, complying with IEEE 1789 recommendation
  • NFC technology for wireless programming
  • Suitable for use in emergency lighting applications
  • Ideal solution for Class I and Class II
  • Helvar Driver Configurator support

 

FUNCTIONAL DESCRIPTION

  • Adjustable constant current output: 100 mA to 1400 mA, 350 mA as default
  • Current setting programmable via NFC, DALI or with external (LED-Iset) resistors
  • Amplitude dimming technology for the highest quality light in every application
  • Suitable for flicker-free camera recording applications
  • Latest technology Switch-Control 2 functionality for easy-to-use intensity control
  • Innovative Direct Control technology to support easy luminaire-based personal lighting level control
  • Full load recognition with automatic recovery, open and short circuit protection
  • Multipurpose terminal LED-Iset/NTC for current setting or overtemperature protection
  • Constant Light Output (CLO), adjustable up to 100 000 h (default disabled)
  • Energy consumption monitor (real time), running hour monitor (accumulative), energy management (accumulative)
  • Memory bank for OEM customer data

MAINS CHARACTERISTICS

Nominal rated voltage range 220 V – 240 V, 0 / 50 – 60 Hz
AC voltage range 198 VAC – 264 VAC
Withstands max. 320 VAC (max. 1 hour)

DC voltage range 176 VDC – 280 VDC
DC starting voltage > 190 VDC
Mains current at full load 0.25 – 0.28 A
Frequency 0 / 50 Hz – 60 Hz
Stand-by power consumption < 0.5 W
THD at full power < 10 %
Leakage current to earth < 0.4 mA
Tested surge protection 1 kV L-N, 2 kV L-GND (IEC 61000-4-5)

Tested fast transient protection 4 kV (IEC 61000-4-4)

Download datasheet

LL80DS-DA/AN-350-1400

80 W SELV Dimmable DALI-2 LED driver

  • SELV output protection for safety and flexibility in luminaires
  • DALI and 1 – 10 V control input, 1 – 100 % dimming range
  • Amplitude dimming for the highest quality light output
  • Improved driver surge protection (4 kV / 4 kV)
  • Low current ripple, complying with IEEE 1789 recommendation
  • Suitable for use in emergency lighting applications
  • Helvar Driver Configurator support
  • Ideal solution for Class I luminaires

FUNCTIONAL DESCRIPTION

  • Adjustable constant current output: 350 mA (default) to 1400 mA
  • Current setting via dip-switches
  • Dimming available through both DALI and 1 – 10 V interfaces
  • Overload, open & short circuit protection
  • External NTC thermal input for overtemperature protection

MAINS CHARACTERISTICS

Nominal rated voltage range 220 V – 240 V, 50 – 60 Hz
Rated emergency voltage range* 196 V – 250 V, 0 Hz
AC voltage range 198 VAC – 264 VAC
Withstands max. 320 VAC (max. 1 hour)

DC voltage range* 176 VDC – 275 VDC
Mains current at full load 0.33 – 0.44 A
Frequency 50 Hz – 60 Hz
THD at full power < 10 %
Leakage current to earth < 0.7 mA
Tested surge protection 4 kV L/N-GND**
4 kV L-N (IEC 61000-4-5)

Tested fast transient protection 2 kV (IEC 61000-4-4)

*For emergency use, see details in page 4
**Up to 2 kV according IEC61000-4-5, up to 4 kV L-GND or N-GND positive surge pulses.

Download datasheet

LL1x80-CR-DA

80 W Dimmable DALI-2 LED driver

  • DALI-2 certified LED driver, 1 – 100 % dimming range
  • Very low flicker output complying with IEEE 1789 recommendations
  • Suitable for flicker-free camera recording applications
  • Very high efficiency up to 93 %
  • Suitable for use in emergency lighting applications
  • Long lifetime up to 100 000 h
  • Driver protection Class I
  • Suitable for closed luminaires where protection done with luminaire construction (Class I or II)
  • Helvar Driver Configurator support

FUNCTIONAL DESCRIPTION

  • Adjustable constant current output: 350 mA (default) to 700 mA
  • Current setting programmable via DALI or with external resistors
  • Filtered dimming for high-quality light in every application
  • Latest technology Switch-Control 2* functionality for easy-to-use intensity control
  • Adaptive LED overload protection, reduces output current if output power over 81 W is detected
  • Full load recognition with automatic recovery, open and short circuit protection
  • Multipurpose terminal Iset/NTC for current setting or overtemperature protection
  • Constant Light Output (CLO), adjustable up to 100 000 h (default disabled)
  • Power consumption monitor (real time), running hour monitor (accumulative), energy management (accumulative)

 

MAINS CHARACTERISTICS

Voltage range 198 VAC – 264 VAC
DC range 176 VDC – 280 VDC
starting voltage > 190 VDC
Mains current at full load 0.34 A – 0.44 A
Frequency 0 / 50 Hz – 60 Hz
Stand-by power consumption 0.3 W
THD at full power < 10 %
Leakage current to earth < 0.5 mA
Tested surge protection 1 kV L-N, 2 kV L-GND (IEC 61000-4-5)
Tested fast transient protection 4 kV (IEC 61000-4-4)

Download datasheet

Vieritä ylös